Catégories
Catégories
- Bag Dump Stations9
- Blenders68
- Blowers24
- Blowers & Fans3
- Boilers15
- Bulk Bag Equipment3
- Bulk Bag Unloaders6
- Centrifuges6
- CIP & COP Systems17
- Coating Pans5
- Coating Pans & Tumblers9
- Conveyors105
- Cooling Towers1
- Crushers9
- Dryers4
- Dust Collectors21
- Exchangers28
- Fans5
- Fillers4
- Filters48
- Granulators5
- Heat Exchangers5
- Laboratory3
- Magnet Traps21
- Mills50
- Miscellaneous7
- Mixers118
- Other21
- Ovens2
- Packaging34
- Pompes1
- Pumps248
- Screens87
- Tanks396
- Vacuum Stuffers6
- Valves29
Machines et équipements industriels de production usagés à vendre à notre Surplus Industriel, découvrez notre inventaire
Vendu
Découvrez plus
USED PAUL O ABBE ROLLING JAR MILL
EXPLOSION PROOF MOTOR:1 HP, 575 VOLT, 1725 RPM
ROLLER LENGTH:48.75''
OUTPUT RPM (APPROXIMATELY):300
VenduDécouvrez plus
USED UNION PROCESS ATTRITION MILL, LABORATORY ATTRITOR
EXPLOSION PROOF MOTOR:3 HP, 200 VOLT, 1170 RPM, 11.5 AMPS
TYPE:B
SIZE:S1
BOWL DIMENSIONS:7.5'' DIAMETER X 8'' DEEP
VenduDécouvrez plus
USED SCHUTTE HAMMER MILL, SWINGING HAMMERS, STAINLESS STEEL, 40 HP
MOTOR:40 HP, 460 VOLT
WITH TOP FEED HOPPER:6'' INLET
ROTOR DIAMETER:24''
SHAFT SPEED:2100 RPM
VenduDécouvrez plus
USED RIETZ RE-15 EXTRUCTOR / PULVERIZER, STAINLESS STEEL, SANITARY
MOTOR:15 HP, 230/460 VOLT, 1750 RPM
SIZE OF CHAMBER:15''
DISCHARGE CHUTE:10'' X 15''
OUTPUT RPM:83.6 APPROX.
VenduDécouvrez plus
USED QUADRO COMIL, MODEL 197, STAINLESS STEEL, SANITARY
STAINLESS STEEL MOTOR:2 HP, 575 VOLT
YEAR OF MFG:2014
OUTPUT RPM:VARIABLE SPEED
TOP PRODUCT INLET FUNNEL:10'' DIAMETER REDUCING TO 3'' DIAMETER
VenduDécouvrez plus
USED FITZPATRICK JT HOMOLOID MILL, STAINLESS STEEL
MOTOR:5 HP, 208.230/460 VOLT, 3500 RPM
SIZE OF CHAMBER:8'' DIAMETER X 2.25'' DEEP
TOP FEED PAN:12'' DIAMETER TO 3'' INLET
DISCHARGE:3'' X 8''
VenduDécouvrez plus
USED WILLIAMS HAMMER MILL, SWINGING HAMMERS, CARBON STEEL, 150 HP
OVER ALL DIMENSIONS:55" LONG X 68" WIDE X 48" HIGH
Horse Power:150 TO 225
VenduDécouvrez plus
USED STEPHAN MCH-D 150 MICROCUTTER EMULSIFIER
MOTOR:60 HP, 400 VOLT, 3000 RPM, 50 Hz, 3 Ph
FLOW RATE CAPACITY:4,500 KG/H *AS PER MFG, APPROXIMATE DEPENDING ON PRODUCT
YEAR OF MFG:2005
PREVIOUS USE:FOOD APPLICATION
VenduDécouvrez plus
USED AMERICAN PULVERIZER HAMMER MILL, FIXED HAMMERS, CARBON STEEL, 7.5 HP
MILL DRIVE MOTOR:7½ HP 1750 RPM 575 VOLT
FEED THROAT:18" WIDE X 1" HIGH,
VenduDécouvrez plus
USED QUADRO COMIL, MODEL 198 S, STAINLESS STEEL, SANITARY
LAST USE:FOOD PRODUCTION,
Horse Power:20
VenduDécouvrez plus
USED QUADRO COMIL, MODEL 196 S, STAINLESS STEEL, SANITARY
STAINLESS STEEL MOTOR:10 HP, 575 VOLT
YEAR OF MFG:2012
OUTPUT RPM:VARIABLE SPEED 450 to 1800 RPM
TOP PRODUCT INLET FUNNEL:20'' DIAMETER REDUCING TO 8'' DIAMETER
VenduDécouvrez plus
USED SCHUTTE HAMMER MILL, SWINGING HAMMERS, CARBON STEEL, 250 HP
MOTOR:250 H.P., 3600 RPM, 575 VOLTS,
ROTOR:24" DIAMETER X 48" WIDE,
HOUSING:3/4" THICK,
SHAFT SPEED:3600 RPM,
VenduDécouvrez plus
USED PULVA PULVERIZER HAMMER MILL , 125 H.P.
MAIN DRIVE:125 H.P., 1700 RPM, 575 VOLT,
SIZE:D,
AUGER SCREW DRIVE:0.75 H.P., 575 VOLT,
VenduDécouvrez plus
USED QUADRO COMIL, MODEL 196 S, STAINLESS STEEL, SANITARY
MOTOR:10 HP, 575 VOLT
OUTPUT RPM:VARIABLE SPEED
TOP PRODUCT INLET FUNNEL:20'' DIAMETER REDUCING TO 8'' DIAMETER
DISCHARGE:14'' DIAMETER
VenduDécouvrez plus
USED FITZ MILL, MODEL DAO6, SWINGING KNIVES, STAINLESS STEEL, SANITARY
MOTOR:5 HP, 575 VOLT, 1750 RPM
OVERALL DIMENSIONS:32'' WIDE X 54'' LONG X 72'' HIGH
PREVIOUS USE:PHARMACEUTICAL APPLICATION
VenduDécouvrez plus
USED FRYMA DEAERATOR, MODEL VE- II, 316 STAINLESS STEEL, SANITARY, WITH HEAT EXCHANGER
CAPACITY RANGE:800 to 4,000 kg/h
USABLE VESSEL VOLUME:65 LITRE
TOTAL VESSEL VOLUME:140 LITRE
THROUGHPUT WITH HIGHLY VISCOUS PRODUCTS:APPROX. 800 kg/h
VenduDécouvrez plus
USED BUHLER K8 CONICAL BEAD MILL
CAPACITY:0.52 DM3 (CUBIC DECIMETER)
PRODUCT FLOW RATE:0.5 to 30 DM3
GRINDING MEDIA:0.65 mm to 2.3 mm
JACKETED FOR COOLING USING WATER AT 3 BAR m3/H:0.9
VenduDécouvrez plus
USED QUADRO COMIL, MODEL 196 S, STAINLESS STEEL, SANITARY
MOTOR:10 HP, 575 VOLT, 1755 RPM
FEED PORT:10''
DISCHARGE PORT:8''
SLOT SCREEN:0.25''
VenduDécouvrez plus
USED FITZ MILL, MODEL D6, SWINGING KNIVES, STAINLESS STEEL, SANITARY, VARIABLE SPEED
MOTOR:5 HP, 575 VOLT, 1745 RPM
PREVIOUS USE:PHARMACEUTICAL APPLICATION
